臥式加工中心
1.機床主要大件均采用優質樹脂砂造型、高強度優質鑄鐵，具有完善的熱處理工藝過程來消除殘余應力，并布置足夠的加強筋板，保證整機具有足夠的強度、剛性和高穩定性;
2.XY軸采用進口重載滾柱導軌，剛性強、動態精度佳;
3.傳動采用臺灣產大直徑研磨雙螺母滾珠絲桿，結構緊湊、運動平穩、精度高。絲桿支撐采用日本產原裝進口絲桿支撐軸承，兩端預拉伸，消除熱伸長造成的精度損失。組成穩定的高剛性機械傳動系統;
高剛性的臺灣產臥加專用主軸，采用潤滑脂潤滑，可使主軸軸承得到恒定和可靠的潤滑，既經濟環保又實現了長期免保養。
Machine tool main parts are made of high-quality resin sand molding, high strength high quality cast iron, with perfect heat treatment process to eliminate residual stress, and layout has the enough strength, rigidity and high stability;
XY axis imports overloaded roller guides, rigidity, excellent dynamic accuracy.
Transmission adopts Taiwan big diameter grinding double nut ball screw, compact structure, smooth movement, high accuracy. Screw is supported by Japanese imported wire rod support bearing, both ends pre-draft, eliminate thermal elongation caused by the loss of accuracy. The stability of high rigid mechanical drive system.
High rigid Taiwan with special spindle, the grease lubrication, can make the spindle bearing get constant and reliable lubrication, both economical and environmental protection and realize the long-term free maintenance.
|
技術參數 |
Specifications |
Units |
HHMC500 |
HHMC630 |
|
工作臺尺寸 |
Table size |
mm |
500×500 |
630×630 |
|
工作臺數量 |
Table quantity |
|
2 |
2 |
|
工作臺分度 |
Table indexing |
° |
1°×360 |
1°×360 |
|
X-軸行程 |
X-axis travel |
mm |
800 |
1100 |
|
Y-軸行程 |
Y-axis travel |
mm |
800 |
800 |
|
Z-軸行程 |
Z-axis travel |
mm |
800 |
1100 |
|
主軸鼻端到工作臺距離 |
Spindle nose to table |
mm |
50-850 |
125-1225 |
|
主軸中心到工作臺距離 |
Spindle center to table |
mm |
125-925 |
50-850 |
|
快移速度 (X/Y/Z) |
Rapid traverse (X/Y/Z) |
mm/min |
12000 |
12000 |
|
進給速度 (X/Y) |
Feed rate(X/Y) |
mm/min |
1-5000 |
1-5000 |
|
工作臺承重 |
Max. load of worktable |
Kg |
500×2 |
800×2 |
|
T 型槽 |
T-slot |
mm |
5-18-100 |
5-16-125 |
|
主軸轉速 |
Spindle speed |
rpm |
8000 |
6000 |
|
主軸錐度 |
Spindle taper |
|
BT40 |
BT50 |
|
主電機功率 |
Spindle power |
kw |
15/18.5 |
15/18.5 |
|
刀庫容量 |
ATC |
|
24/30 |
24/30/60 |
|
定位精度 |
Positioning accuracy |
mm |
±0.003 |
±0.003 |
|
重復定位精度 |
Repeat accuracy |
mm |
±0.001 |
±0.001 |
|
機床重量 |
Machine weight |
kg |
10500 |
14500 |
|
機床尺寸 |
Dimensions |
mm |
4850×2530×2480 |
6250×2660×2600 |
HHMC雙工作臺臥式加工中心
HMC臥式加工中心
臥式加工中心HMC
